In the world of light, the high bay is a fixture that you would discover in a warehouse, a factory, a gymnasium, or any large open area with comparatively high ceilings. Many prevailing high bay lighting and low bay lighting applications develop high intensity discharge lamps like metal halide or high sodium lamps. Get led bay light here https://www.lepro.com/led-bay-light.
More know About Your Project
Despite their general use, high intensity discharge lamps utilize out-of-date technology that expenses building managers both directly and indirectly. Specifically using high intensity discharge lamps will result in:
higher than necessary energy expenses, numerous maintenance expenses, and poor lighting performance.
These problems can all be addressed by converting your current lighting to LED.
Energy Savings
Energy savings is a main driver behind why you should estimate LED lighting for your building or facility. Common wattages for LED high bay fixtures can sort from 95 watts to 495 watts. If we associate this wattage to a representative HID high bay fixture that same kind is 175 watts to 1000 watts.
Consequently, by switching to LED lighting you're immediately reducing your energy consumption by 40%-60%. To place this in dollars, you would be saving $300 per fixture per year in electricity charges if you made the shift to LED lighting. Depending on the scope of your facility this can really affect the working balance sheet.
Maintenance Cost Reduction
By transforming to LEDs you will also see affected reduction in the maintenance of your high bay light fixtures. This is due to the way LEDs produce light, and the way they progress complete their functional life. Instead of ending to task properly once a fuel source is expressively condensed, LED produced light output reduces very slowly over time. As a result, the functional life of an LED product can be significantly longer than that of a HID Lamp, therefore drastically reducing the maintenance load required.
For example, by transforming conservative 400w HID high bay lighting to LED, a typical building with industrial light fixtures can save up to $5,341 over the development of three years in maintenance expenses alone.
Lighting Performance
Lastly, lighting act is a serious factor in evaluating the move to a different type of lighting. From act position, LEDs are a head-and-shoulders above their HID corresponding item.
LEDs consume a multi-point design, meaning they deal out light on the intended surface evenly. Therefore, light levels across a given surface will vary less between fixture growing places. In lepro.com addition to the even distribution of light, LEDs are available in a range of CCTs (correlated color temperatures) and as a result provide a range of options to increase the visual perception of “brightness."
In contrast, HID fixtures produce a “bright spot” straight under the fixture with light levels decreasing as the distance between fixtures increases.
Conclusion
In conclusion, we can see that there are three main drivers to ruminate installing an LED retrofit in your facility. By transforming you will see direct energy savings, reduced rate of lighting maintenance, and an uptick in overall lighting performance. To learn more contact Stouch Lighting today. We would be happy to provide a free taxation of your facility. We look forward to working with you.